METABO MAG 32 MAGNETIC CORE DRILL

(220-240 V / 50 - 60 HZ); PLASTIC CARRY CASE

Rated input power: 1000 W

Max. drill-Ø with core drill: 32 mm / 1 1/4 "

Max. drill-Ø with spiral drill: 13 mm / 1/2 "

Maximum drilling depth: 50 mm / 2 "

No-load speed: 700 rpm

Bit retainer: Weldon shaft 19 mm (3/4")

Max. magnetic holding force: 12250 N

Qty

Large stroke, therefore suitable for use of core drills, spiral drills and countersinks
Magnetic base with high holding power permits working on vertical surfaces and overhead
Robust Metabo marathon motor with internal wiring for long service life
Integrated coolant container for easy to dose internal cooling of the core drill
Bright LED light for easy alignment in poor light conditions
Swarf protection can be fixed without tools and protects the user from metal shavings and tool contact
Protective circuit starts motor only if the magnet is activated
Restart protection: prevents unintentional start-up after power supply interruption
Lockable slide for comfortable tool change
Handle for easy carrying and lifting
Resistant mains cable (5 m) with rubber shroud

Characteristic
Bit retainer	Weldon shaft 19 mm (3/4")
Height carriage lowest position	343 mm / 13 1/2 "
Height carriage topmost position	490 mm / 19 9/32 "
Max. depth of feed	160 mm / 6 5/16 "
Max. drill-Ø with core drill	32 mm / 1 1/4 "
Max. drill-Ø with spiral drill	13 mm / 1/2 "
Max. magnetic holding force	12250 N
Maximum drilling depth	50 mm / 2 "
Revolutions at rated load	450 rpm
Rated input power	1000 W
Torque	50 Nm / 443 in-lbs
No-load speed	700 rpm
Output power	520 W
Noise emission
Sound power level (LwA)	98 dB(A)
Sound pressure level	85 dB(A)
Vibration
Drilling in metal	2.5 m/s²
Uncertainty of measurement K	3 dB(A)
Meansure
Dimensions of the magnet base	90 x 189 mm / 3 9/16 x 7 1/2 "
Cable length	5 m / 16 ft
WEIGHT	11.9 kg / 26.2 lbs

There are no reviews for this product.

Write a review

Your Name

Your Review

Note: HTML is not translated!

Rating Bad Good